Search results for Led driver


LEORX LED Power Supply Driver Transformer - 36W, 12V DC, 3A - Constant Voltage for LEDs, Including LED Strip Lights ...

LEORX LED Power Supply Driver Transformer - 36W, 12V DC, 3A - Constant Voltage for LEDs, Including LED Strip Lights ...

Made especially for powering LED lights, this high-quality power supply will convert household AC current to 12V DC. Perfect for any LED installation that draws up to 3A of current, including LED light strips, G4 LED bulbs, MR11 LED bulbs, MR16 LED bulbs, or your own custom-built project with multiple LEDs wired in series. Electrical connections are easy and safe with this power supply. Input and output are clearly marked, and the terminals are fully covered and insulated by the orange end-caps for safety. The terminals are screw-clamp type: Just strip off 3/16" of insulation from each wire, insert the wire into the appropriate terminal hole and tighten down the screw. No soldering, wire nuts, or exposed connectors. The ...


LED Driver Transformer 240V - 12V including MR16 connector / 240v AC to 12v DC / 0.5w - 12w / ...

LED Driver Transformer 240V - 12V including MR16 connector / 240v AC to 12v DC / 0.5w - 12w / ...

Please note: The connecting input and output wires are hard wired in. LED Driver (Transformer) which also includes the MR16 bulb connector. ZERO Interference with Dab and Wifi. If you find that the LED bulbs you have just installed are flickering and not bright!! You need these Drivers! Very easy to install, just replace the old transformers with these drivers. To get the best performance and longevity for your LED lights and strip lights, LED drivers are needed instead of standard transformers commonly used for halogen spot light bulbs. Without an LED driver there is a possibility that the LED bulb/strip light will either not work or flicker. If the LED bulb/strip light is fitted with a normal transformer, the ...


SEBSON 15 W LED Driver/LED Transformer – ultra slim 100X35X16 MM – TRANSFORMER POWER SUPPLY

SEBSON 15 W LED Driver/LED Transformer – ultra slim 100X35X16 MM – TRANSFORMER POWER SUPPLY

LED Transformator 15W - This LED driver is suitable for the use with LED light bulbs (e.g. MR16 / G4 LED lights from our shop). - The LED driver should not be used at maximum load. We highly recommend a reserve of at least around 15%. - Specifications - Input: 200-240V AC +/- 10%, 50/60Hz - Output: 12V DC +/- 0,5V | 1,25A | 15W - Size: approx. 98 x 32 x 13mm - Ambient temperature: max. 45°C - Housing temperature: max. 80°C - Primary cable: H03VVH2-F 2x0,75mm² - Secondary cable: H03VVH2-F 2x0,75mm² - Protection rating: IP20, not water or damp proof - Operating temperature: -20°C bis +45°C - Connections: lustre terminal - Body housing: plastic - ...


SEBSON® LED Transformer 12V - LED Driver 30W - MR16/ GU5.3/ G4

SEBSON® LED Transformer 12V - LED Driver 30W - MR16/ GU5.3/ G4

LED Transformator 30W - This LED driver is suitable for the use with LED light bulbs (e.g. MR16 / G4 LED lights). - The LED driver should not be used at maximum load. We highly recommend a reserve of at least around 15%. - Specifications - Input: 220-240V AC, 50Hz - Output: 12V DC | 2.5A | 30W - Size: approx. 160x58x18mm - Protection rating: IP20, not water or damp proof - Connections: lustre terminal - Body housing: plastic - Scope of delivery: - 1 x 30W LED driver from SEBSON® - SEBSON® LED Transformer/ LED Driver 30W - Input: 220-240V AC, 50Hz / Output: 12V DC - 2.5 A - 30W - Size: approx. 160 ...


ADOGO LED Transformer LED Power Supply- 60W, 12V DC, 5A - Constant Voltage for LED Strip Lights and G4, MR11, ...

ADOGO LED Transformer LED Power Supply- 60W, 12V DC, 5A - Constant Voltage for LED Strip Lights and G4, MR11, ...

Made especially for powering LED lights, this high-quality power supply will convert household AC current to 12V DC. - Perfect for any LED installation that draws up to 5A of current, including LED light strips, G4 LED bulbs, MR11 LED bulbs, MR16 LED bulbs, or your own custom-built project with multiple LEDs wired in series. - Electrical connections are easy and safe with this power supply. - Input and output are clearly marked, and the terminals are fully covered and insulated by the orange end-caps for safety. - No soldering, wire nuts, or exposed connectors. The power supply has built-in thermal overload and short circuit protection for added safety. - ...


1-Pack Premium IP44 12V 1A 12W Low Voltage LED Driver Transformer AC DC Switching Power Supply

1-Pack Premium IP44 12V 1A 12W Low Voltage LED Driver Transformer AC DC Switching Power Supply

* "A Product of ClickBuy Group, Shop Original" * Input condition: AC 100~240V (110V/230V compatible), 50-60Hz, minimum load required 0.5 watts. * Output: DC 12V, Max. 1A 12W, 1000mA. * Small and compact in size. Can be easily installed anywhere with minimal space required. * Easy installation with simple parallel wiring. Automated protection against short circuit, over voltage and over current. * IP44 rated makes it suitable for bathroom installation. * Long trouble-free working life and with 2 years manufacturer warranty * Ideal for G4 capsule lamp, MR11/MR16/GU5.3 LED spotlight light bulb, flexible LED strips, CCTV camera power supply and much more - * "A Product of ClickBuy Group, Shop Original" (Note: This Product Provides Constant Voltage Output, Dimmable Only ...



Philips 15W ET-S 15 Dimmable LED Driver Power Supply MR16 220~240V Electronic Transformer 12V LED Compatible Only

Philips 15W ET-S 15 Dimmable LED Driver Power Supply MR16 220~240V Electronic Transformer 12V LED Compatible Only

Authentic philips LED Electronic Transformer , dimmable! - Input : 220-240V , Output : 11.3V ~ - Wattage : 2~15W - Dimmable , indoor use only - Lifetime : above 40,000 Hours - Easy and convenient install and operation


LED Drivers 240v to 12v transformers including MR16 connnectors x 4 - 0.5W - 12W - ZERO Interference with Dab ...

LED Drivers 240v to 12v transformers including MR16 connnectors x 4 - 0.5W - 12W - ZERO Interference with Dab ...

Please note: The connecting input and output wires are hard wired in. 4 X LED Drivers (Transformers) which also includes the MR16 bulb connector. ZERO Interference with Radio and Wifi. To get the best performance and longevity for your LED lights and strip lights, LED drivers are needed instead of standard transformers commonly used for halogen spot light bulbs. Without an LED driver there is a possibility that the LED bulb/strip light will either not work or flicker. If the LED bulb/strip light is fitted with a normal transformer, the LED bulb/strip light will have a significantly reduced life and can fail after 100's hours instead of life expectancy of 30,000 - 50,000 hours. These LED drivers are suitable for ...


YUNLIGHTS LED Transformer Low Voltage 70W AC 220-240V to AC 12V for Halogen Lamps and LED lights

YUNLIGHTS LED Transformer Low Voltage 70W AC 220-240V to AC 12V for Halogen Lamps and LED lights

Made for powering halogen lamps and LED lights, this high-quality power supply will convert household AC 220-240V current to 12V AC. - Electrical connections are easy and safe with this power supply. Approved the EMC test, and the power supply has built-in thermal overload and short circuit protection for added safety. - Note: - 1, Dimmable ONLY for halogen bulbs. It can be used to adjust the brightness ONLY for halogen lamps. If it is used for LED lights, the light will flicker. - 2, Please make sure the input voltage of your LED lights is AC 12V or DC 12V (or AC and DC common) before you using this transformer to connect LED lights. If your LED ...


JZK® LED transformer driver converter 12v max 30w for LED lighting, G4, MR11, MR16 etc.

JZK® LED transformer driver converter 12v max 30w for LED lighting, G4, MR11, MR16 etc.

JZK® LED transformer driver converter AC DC 12v 30w - * Model: TXY-12002500 - * Type: LED power supply - * Modulation: Pulse width modulation (PWM) type - * Transistor connection: single-ended - * Transistor connection: single-ended - * Input voltage: 100-240V, 50/ 60Hz - * Output power: 30W - * Output voltage: 12V - * Work efficiency: 85% - * Output ripple noise: 120mv - * Output voltage accuracy: 1% - * Voltage regulation: 5% - * Load regulation: 5% - * Product Certification: CE, ROHS - * Output current: 2.5A - * LED power supply: constant voltage power supply - * Size: 9.4cm x 4.4cm x 2.3cm(L x W x H) - * Weight: about 77g - ...


G4 LED Light Bulb Driver Transformer 12 V DC 0.5-15 W

G4 LED Light Bulb Driver Transformer 12 V DC 0.5-15 W

Scope of work: 0.5 W to 15 W - Small size - Easy installation - Dimensions: 92 x 42 x 20 mm


18w LED Driver Transformer for MR16-MR11-G4 LED Light Bulb by Long Life Lamp Company

18w LED Driver Transformer for MR16-MR11-G4 LED Light Bulb by Long Life Lamp Company

LED Driver 18w DC, Using G4,MR16, MR11 and LED Strip LEDs light bulbs with this LED driver instead of an existing Low Voltage transformer will double the life of the G4, MR16 and MR11 LED Light Bulb, constructed to very quality for extended reliability and long life, made by Long Life Lamp Company - 18W LED driver - Use with G4, MR16 & MR11 LED bulbs - Can be used for LED strip Lights - CE


240v - 12v LED Driver for 6W Energy Consumption, Comes with 4-Way Socket and 2 Metre Input Cable

240v - 12v LED Driver for 6W Energy Consumption, Comes with 4-Way Socket and 2 Metre Input Cable

LED Driver required for use with various LED fittings. Supplied with a JB plug in junction box. - Driver for LED fittings to convert mains voltage 240v circuit to low voltage 12V - Suitable for up to 6W energy consumption with Wattlite 'Flat' and 'Flexible' ranges - Comes with 2 metre cable on input and 4-way AMP socket on output - Includes integrated auto reset, electronic short circuit protection and overload protection


Related searches
Led bulbs   Led candle bulb   Led ceiling light   Led desk lamp   Led downlights   Led floodlight   Led pir floodlights   Led grow light   Led kitchen lighting ceiling